
Questions we are asked most.
How much refinishing costs, how long it takes with Rubio or Bona, whether you can stay in the house, and how color matching works. Straight answers from SOLUM Floors.
Questions we are asked most.
How much does it cost?
It depends on five things: the square footage, the condition of the existing floor, whether the subfloor needs leveling, the material and finish system you choose, and the complexity of the space: stairs, closets, pattern work and a lot of small rooms all cost more per square foot than one open field.
A floor that simply needs sanding and finishing is a very different job from one with twenty damaged boards underneath, and an installation over a flat wood subfloor is a different job from one over a slab that has to be ground and leveled first.
We do not publish a price per square foot. A number without a walkthrough behind it is a guess, and guesses get revised upward once the work starts, which is where most of the bad experiences people tell us about began. We come out, look at the floor, and send a written quote within 24 hours. The visit is free and there is no obligation attached to it.
How long does installation take?
Four to six days for around 1,000 square feet, from the first day on site to final inspection, when the material is prefinished or the subfloor is sound.
Add time for subfloor leveling, for herringbone or chevron and other pattern work, for stairs, and for unfinished material that has to be sanded and finished in place after it is laid. Add acclimation time before any of it, since wood needs to sit in the rooms before it goes down. Luxury vinyl and laminate generally run faster, since there is no finishing stage at all.
Whatever your project needs, the schedule comes in writing with the quote: start date, the days we are in the house, and when you get the space back.
How long does sanding and refinishing take?
It depends on the finish, and the difference is real. For about 1,000 square feet:
Rubio Monocoat: three to four days on site. Two to three days of sanding, about half a day of cleaning and preparation, and one full day for the application — a single coat, buffed and wiped back properly.
Bona: four to six days. The same sanding and preparation, then three to four coats, each screened before the next, with drying time in between.
Either way: socks on the floor after 24 hours, furniture after three days. Stairs, extensive board replacement, prefinished floors and removing an old solvent-based finish all add days.
Can you match our existing floor?
Yes, and it is one of the things we are known for. We mix and test stain on your actual boards, not against a chart or a sample finished in someone else's shop, let it dry, and show you the match in your own room under daylight and lamplight before committing to the rest of the floor.
One honest limit: on a very old floor, an exact match to aged wood with new material is sometimes not achievable on day one. New boards close most of the gap over the following year as they take on their own patina, but they do not start there. If that is your floor, we will say so at the consultation rather than after the work.
Will it make a lot of dust?
No. Every sander on site — the drum sander, the edger and the corner tool alike — connects to a sealed vacuum system that captures the dust at the source, before it gets into the air of your house. This is not plastic sheeting over the doorways, it is dust collection built into the equipment itself.
No film on your counters, no grit in the finish, and no cleanup waiting for you when we leave.
Can we stay in the house?
You can, and dust is not the reason we usually suggest otherwise. A floor that is not walked on cures evenly and finishes faster, and freshly finished areas are off limits until they dry no matter who is in the building.
For a whole-home refinish, most clients arrange to be away for the finishing days in particular. For a single room, or a project we phase in sections so there is always a clear path, staying is usually straightforward, and we will map that out with you at the walkthrough.
Pets are the harder part. They cannot be told to stay off a wet finish, and paw prints set into a finish are permanent. If you have animals, plan for them to be elsewhere on the finishing days.
Can my floor be refinished, or does it need replacing?
Most floors can be refinished, including a great many that look beyond saving. Scratches, dark staining, sun fading and a finish worn through to bare wood in the traffic paths are all normal and all correctable.
What decides it is how much wood is left to work with: on solid hardwood, the thickness remaining above the tongue, which usually allows several sandings across a floor's life; on engineered, the thickness of the real wood wear layer above the core. Deep cupping from an ongoing moisture problem, boards already sanded down to the fasteners, or water damage that has reached the subfloor are the cases where we will tell you to replace.
Send a photograph. We can usually give you a strong answer from one image, and a definitive one at the consultation.
Can prefinished hardwood floors be refinished?
Yes, and it is one of the things that sets us apart. Many prefinished floors carry an aluminum-oxide factory finish, which is exceptionally durable and therefore significantly harder to sand than a floor finished on site. A lot of contractors decline the job for that reason, or take it on and do it badly.
We assess the existing finish, the construction of the flooring, the remaining wear layer and the condition of the wood before any sanding begins. Because each refinishing removes part of that wear layer, these floors have a finite number of opportunities, particularly engineered products. Our goal is to remove only what is necessary and preserve as much of the floor's remaining life as possible.
Do you install LVT or carpet?
We install luxury vinyl — LVP and LVT — and laminate, alongside hardwood, engineered and prefinished wood. We do not install carpet or tile.
Specializing in these materials is why we can tell you what your floor needs with precision instead of generality.
Is the finish safe around children and pets?
Both systems we use are low-VOC. Neither is the solvent-based finish that used to make a refinishing job uninhabitable for a week.
Tell us at the consultation if there are children, pets, or anyone in the house sensitive to odour. It changes what we recommend and how we schedule the work — Rubio Monocoat carries a stronger scent while it is going down, and Bona is lower in odour during application.
Which sheen should we choose?
It is the decision clients most often revisit. The higher the gloss, the more a floor reflects and the more it reveals: semi-gloss shows dust, pet prints and every scratch.
Matte and satin hide daily life and read as more contemporary, which is why almost every floor we finish now lands there.
How often will a floor need refinishing?
In a normal household, a properly finished floor goes eight to fifteen years before it needs a full sanding, and often longer. Sunlight, large dogs, sand tracked in from the beach and entry points without mats all shorten it; the rest of the house usually stays fine far longer than the hallway.
But full refinishing is not the only option, and it is not the one we want you to reach. If we recoat the surface before the wear cuts through to bare wood, the floor is reset for years at a fraction of the cost, in a day rather than a week, and without spending any of the floor's thickness. On a Rubio Monocoat floor, a single worn area can often be re-oiled in place without touching the rest of the room. A floor maintained that way can last as long as the house.
What happens if something goes wrong afterwards?
Call us and we come and look at it. If a verified issue comes from our workmanship, we make it right.
Wood is a natural material and it moves with the seasons. Some of what people worry about is normal behavior rather than a defect, and we will tell you which is which.
Written warranty terms come with your proposal, for your specific floor and finish system, because what is reasonable to cover depends on the material and on the house.
We are in a condo with an HOA. Is that a problem?
No, and we work in buildings like yours regularly across the coastal communities. It just needs planning rather than improvisation.
Most associations require a certificate of insurance naming the building, restrict work to specific hours, and want elevator and loading access reserved in advance. Some also specify a sound-rating requirement for underlayment on upper floors. Send us whatever your HOA has issued and we will handle the paperwork and build the schedule around their rules, so nothing gets stopped on day one.

Let's look at your floors.
Still have a question? Send a photo of the floor.